Acrylic Tube Rotameter with Control Valve
This type of Rotameter is especially designed for
measurement of gas flows. A needle valve is
integrated on the inlet of the Rotameter for flow
adjustment.
Body Casing: Acrylic Block
Metering Tube: Acrylic Tube
Control Valve: Provided at Inlet
Float: PP/SS
Gasket: Buna NBR
Max Pressure: 10 Kg/Cm2
Max Temperature: 50 D
Glass Tube Rotameter with Control Valve
This type of Rotameter is especially designed for
measurement of gas flows. A needle valve is
integrated on the inlet of the Rotameter for flow
adjustment.
Body Casing: M.S Casing
Metering Tube: Borosilicate Tube
Control Valve: Provided at Inlet
Float: PP/SS
Gasket: Buna NBR
Max Pressure: 14 Kg/Cm2
Max Temperature: 100 Deg C
Acrylic Tube Rotameter
This type of Rotameter is especially designed for
measurement of gas flows. Application varies as per
customer requirement
Body Casing: Acrylic Block
Metering Tube: Acrylic Tube
Float: PP/SS
Gasket: Buna NBR
Max Pressure: 14 Kg/Cm2
Max Temperature: 50 Deg C
Connection: Top & Bottom
Glass Tube Rotameter
This type of Rotameter is especially designed for
measurement of gasses & Liquid flows.
Flange Top & Bottom
Body Casing: M.S Casing
Metering Tube: Borosilicate Tube
Control Valve: Provided at Inlet
Float: PP/SS
Gasket: Buna NBR
Max Pressure: 14 Kg/Cm2
Max Temperature: 100 Deg C
Connection: Threaded & Flange
DIGITAL MASS FLOW METER MODEL JI-MFM-DT
Design Features:
Integrated Mass flow and temperature measurement
- Measurement Range 0~200L/min
- Good repeatability
- Support multiple gas measurement
- Configurable parameters
- Standard Modbus-RTU communication
- Segment code screen display
- Battery or 9~24V DC power supply
- Default NPT 1/2 connection, interface can be customized according to customer needs
Product Summary
JI-MFM-DT is a thermal mass flow sensor that calculates the mass flow of the measured gas by
Measuring the change in resistance.
The sensor adopts the self-developed MEMS mass flow chip, which is intuitive, accurate, stable, and
has features of high and low temperature resistance, good linearity, and fast response time.
The relevant performance and parameters are strictly tested and calibrated before
delivery.
Applications
JI-MFM-DT is used to monitor the mass flow of air, Nitrogen, Oxygen, Argon, Carbon Dioxide and
other dry, clean and non-corrosive gases (except flammable and explosive gases). It can be widely
used in university scientific research, fire protection, environmental monitoring, tobacco, smart
agriculture, food, medicine and other industries
Additional information
Measurement Range : 0 to 200 LPM
Accuracy : +/-3% FS
Repeatability : 0.5% FS
Response Time : Less then 2 Seconds
Power Supply : 3 Pc AA Battery Or External Power Supply 9-24 VDC
Output Signal : RS485
Display : Segment Code Screen
Unit : Cumulative Flow, SL (L, Standard Condition) Instantaneous Flow: SLPM (L/Min Standard Condition)
Max Working Pressure : 0.8 mPa
Pressure Loss : Less then 2000 Pa
Application : Air Gas
Pinout : Type-C
Connector : 1/2" NPT (M)
Weight : 280 Gms
Power Consumption : Less then 50 mW